General

The series 1205 pipe support system has been developed to accommodate the many different types of pipe support designs which have proven expensive to adopt in stainless steel.

The unique design enables a multitude of design options all based on the Series 1205 bossed clip.

The series 1205 clip can be used to clamp, guide or hang pipes in position with a minimum of basic components. Because these components can be used in a variety of ways, a complicated support system can be built with the minimum of technical design input.

The unique multiple bossed 'Radial 1205' can be manufactured to suit most applications removing the normal restrictions of conventional pipe support designs.

Advantages

Availability
...in stainless steel ex-stock basis
...non-standard Series 1205 clip assemblies can be manufactured within 24 hours

One basic component
...many pipe supporting arrangements

Versatility
...most conventional support arrangements can be accommodated using the Series 1205 support system.

Space & Cost saving
..pipes can be fixed closer together along the same support by a combination of the 'Radial Boss' 1205's and varying stud lengths..

No dissimilar metal consideration
..the bossed clamping system holds the pipe away from the support bracket. Hence, no need for insulating pads.

Easy insulation
..the simple clamping of the 1205 rubber lining, which can be done on site, will insulate the clip &/or matric from heat and vibration.

Load distribution
..weight of pipes can be distributed by supporting from multiple fixed points.

No limitation on clip manufacture
..Series 1205 clips can be manufactured for larger pipe sizes as they are not limited by small casting moulds. Primarily supplied in stainless steel tgey can be manufactured in most metals.

Matrix development
..single or multiple pipe lines can be replaced or removed easily after they have been installed.
..A Series 1205 clip assembly can be replaced with a different size without the need for new supports and/or without additional drilling of new fixing holes.
..also, the old Series 1205 clip can be put back into stock and re-used on another line