Zinc Plated Fasteners

Information

Zinc Plated Fasteners

Zinc Plated Fasteners: Nuts, Lock Nuts, Washers etc.

Zinc Plated FastenersThere are 56 products.

Subcategories

  • Zinc Plated Full Nuts - Grade 8

    Hexagonal Full Nuts are used for fastening bolts, screws, anchors, studding and other fasteners with a machined thread. 

    BZP - Bright Zinc Plated - A 3 micron plating is applied to the steel to give a shiny finish. Although it does afford some protection this is best suited to an indoor use.

  • Zinc Plated Half Nuts - Grade 8

    Hexagonal Half Nuts also known as lock nuts are used for fastening bolts, screws, anchors, studding and other fasteners with a machined thread along side a full nut. The half nut tightens onto the back of a hexagonal full nut for extra security by 'locking' it in place.

    BZP - Bright Zinc Plated - A 3 micron plating is applied to the steel to give a shiny finish. Although it does afford some protection this is best suited to an indoor use.

  • Zinc Plated Nylon Insert Lock Nuts

    Full nut with an undersized nylon insert that when fastened get deformed but not cut by the mating thread that creates a lock that will also dampen the vibrations between the thread and the nut, this also provides a moisture and gas seal. As the nylon insert gets deformed not cut by the mating thread it can be re-used a limited number of times.

    BZP - Bright Zinc Plated - A 3 micron plating is applied to the steel to give a shiny finish. Although it does afford some protection this is best suited to an indoor use.

  • Zinc Plate flat Washer

    Flat Washer, these are a thin circular plate with a central hole. They are used to distribute the load of a threaded fastener for example a nut or bolt.

    BZP - Bright Zinc Plated - A 3 micron plating is applied to the steel to give a shiny finish. Although it does afford some protection this is best suited to an indoor use.

  • Zinc plated spring washers

    Spring Washer, these are a thin circular plate with a central hole but have a split in and bent into a helical shape. They are used to increase the force between the male and female thread increasing friction and therefore resistance to rotation, hence they are sometimes referred to as lock washers.

    BZP - Bright Zinc Plated - A 3 micron plating is applied to the steel to give a shiny finish. Although it does afford some protection this is best suited to an indoor use.

  • Zinc Plated Left Hand Thread Nuts - Grade 8

    Hexagonal LHT Full Nuts are used for fastening bolts, screws, anchors, studding and other fasteners with a reversed machined thread making an anti-clockwise tightening thread (LHT). 

    BZP - Bright Zinc Plated - A 3 micron plating is applied to the steel to give a shiny finish. Although it does afford some protection this is best suited to an indoor use.

  • BZP Hemispherical Washers

    Hemispherical Washers are half a sphere with a hole perpendicular to the flat side which corresponds to the thread size you will use it with. They are used alongside hemispherical cups which sit together allowing for up to 10 degrees movement from the vertical.

    BZP - Bright Zinc Plated - A 3 micron plating is applied to the steel to give a shiny finish. Although it does afford some protection this is best suited to an indoor use.

  • BZP Hemispherical Cup

    BZP Hemispherical Cups are cylindrical with part of a sphere cut out of one side with a hole in the center that corresponds to the thread size being used. They are used alongside hemispherical washers which sit together allowing for up to 10 degrees movement from the vertical.

per page
Showing 1 - 12 of 56 items
Showing 1 - 12 of 56 items