Fasteners (Nuts, Bolts, Washers)
Fasteners (Nuts, Bolts, Washers)

Fasteners (Nuts, Bolts, Washers)

There are 371 products.

Subcategories

Stainless Steel Fasteners

Stainless Steel Fasteners: Nuts, bolts, washers etc

Zinc Plated Fasteners

Zinc Plated Fasteners: Nuts, Lock Nuts, Washers etc.

Galvanised fasteners

Galvanised fasteners: Nuts, UNC Nuts, Washers etc.

Heavy Hexagon Nuts

Heavy Hexagon Nuts

Heavy hex nuts are slightly larger and thicker than standard nuts (H=D, so the height of the nut = the diameter of the bolt). There are numerous grades

Since hot-dip galvanizing typically adds 2.2 to 5 mils of thickness to the threaded portion of a fastener, galvanized heavy hex nuts are tapped oversize to compensate for the corrosion resistant coating on the thread of the bolt

Self Colour Mild Steel Hexagon Nuts - Grade 8 - Din 934

Hexagonal Full Nuts are used for fastening bolts, screws, anchors, studding and other fasteners with a machined thread and a Half Nut is used to 'lock' that in place hence why they are sometimes referred to as lock nuts.

Self Colour Mild Steel UNC Hexagon Nuts - BS 1768

Hexagonal Full Nuts are used for fastening bolts, screws, anchors, studding and other fasteners with a machined thread and a Half Nut is used to 'lock' that in place hence why they are sometimes referred to as lock nuts.

Metal and Nylon spacers / washers

Metal and Nylon spacers / washers, can be used to stop wear on a certain component or simply to fill a space for example holding a panel off a wall.

Chemical / Resin Bolts
Chemical or resin anchors are generic terms relating to steel studs, bolts and anchorages which are bonded into a substrate, usually masonry and concrete, using a resin based adhesive system. Ideally suited for high load applications, in virtually all cases the resulting bond is stronger than the base material itself and as the system is based on chemical adhesion
Showing 1 - 8 of 371 items