U-Bolt Selector (666 products)

Design

Nominal Bore

U-Bolts

Information

U-Bolts
A range of U-bolts for clamping pipes, tubes, handrails and more

U-BoltsThere are 666 products.

Subcategories

  • Insulating Rubber Lined U-Bolts

    Insulating rubber lined u-bolts

    Used to prevent galvanic corrosion due to the contact of dissimilar metals in the presence of an electrolyte.
     
    Also, for the prevention of wear and / or  crushing of composite, thin wall or non ferrous pipework
  • British Standard U-Bolts

    Our British Standard U-bolts conform to BS 3974 Part 1 and are available as Gripped (Anchor) or Non-Gripped (Guide). Typically stocked in Bright Zinc Plated mild steel (BZP), T304 & T316 stainless steels, though other materials are available on request Non-Gripped type (1101 series) are used where it is undesirable to restrict longitudinal movement

  • Light Pattern Grip U-Bolts

    Light Pattern U-bolts are designed around British Standard pipe sizes and are a Gripped (Anchor style) used for lighter applications.

  • Extended Leg Light Pattern U-Bolts
    The extended leg range are designed around British Standard pipe sizes. They are classed as a non-grip U-bolt
  • Graphskill Standard U-Bolts
    Graphskill Standard U-Bolts - General U-bolts not specifically designed around British Standard Pipe sizes
  • Anti-Vibration Rubber Lined U-Bolts
    Anti-Vibration Rubber Lined U-Bolts
     - Reduce or eliminate noise and fatigue due to vibration of pipework against the supporting structure
     
     - Prevention of galvanic corrosion due to the contact of dissimilar metals in the presence of an electrolyte
     
     - Prevention of wear and / or crushing of composite, thin wall or non-ferrous pipework

    Available in standard and light duty variations
  • UNC Threaded U-Bolts
    UNC Threaded U-Bolts
  • Low friction, non grip, anti-vibration u-bolts (Patent Pending)

    These ubolts have been developed to enable pipes to be securely guided with a minimum of friction so safe-guarding the pipe from expansion & contraction wear due to temperature changes; whilst also reducing the noise & vibration of the pipe.

    They are fitted with a gap between the ubolt and the pipe enabling the pipe to expand & contract yet keeping it fully guided in position.

    The rubber base pad acts to reduce the noise & vibration of the pipes as they carry their fluid and it is fitted with a PTFE strip to reduce the friction and hence protects the pipe as it expands & contracts. The pad also contains a metal spacer for the U-bolt legs to go through giving strength to the pad, and a firm anchor for fastening the nuts at the required position.

    The patented-pending ubolt sleeve is a low friction silicone rubber which rotates around the ubolt to enable the pipe to move unrestricted but be fully guided in position on the supporting framework.

    These are a much cheaper and more reliable solution to the conventional rubber lined ubolts which have PTFE bonded to the inside surface of the rubber coated ubolt.

    Although Ubolts with the PTFE strip bonded to the rubber profile around the ubolts have been in common use for many years, they are prone to the PTFE separating from the rubber due to the difference in the expansion coefficient of the rubber and the PTFE. This problem is eliminated by Graphskill’s unique solution of a single medium with minimal friction

per page
Showing 1 - 12 of 666 items
Showing 1 - 12 of 666 items